Comes ready with embedded algorithms for these applications:

• WIM- Weighing Trucks & Trains in motion. Fits HS (high speed) and LS.

• LIW - Loss In Weight rate controller for continuous feeding to a process.

• Batching & Filling controller - Stand alone controller for high speed net-weight fillers. Example: Bag filling machine.

• Checkweigher - Makes the board a stand-alone controller that fits most common Checkweighers. It includes outputs for rejects.

• Force measurement & Monitoring forces - Our useful monitoring utility, a vital analyzing tool for all dynamic load and force measurement applications.

• High speed in-motion weighing controller - To weigh packages while passing over a conveyor.

Main Features

• Very high speed; Internal A/D 52,000 samples per second

• Updating the PC at streaming mode at a rate of 18,000 samples per second

• 24 Bit A/D with ± 8 million counts for tension and compression applications

• Powerful 32 bit / 135 MIPS DSP for high speed onboard processing. OEM applications can be embedded on the board

• 4 opto-isolated outputs configurable as setpoints, latching alarms or user outputs

• 4opto-isolated inputs; Input #1 has counter option

• Analog output 0 to 2.5V,16 bit resolution

• 8 digit LED display, LEDS to show the board status and I/O status

• Easily updating of firmware, free to download from our web site

• On board temperature sensor

• USB Interface; 2.0 Full Speed compatible

• RS232/RS485 communications. Ideal for PLC based applications

• Multiple boards may be connected via USB or RS485
   

Specifications Load Cell input

• 5 Volt excitation for up to 10 load cells in parallel (350 Ohm)

• Compatible with 1,2,3 mV/V strain gage load cells

• Low noise wide bandwidth amplifier & 24 bit ADC

• Standard interfaces

• USB 2.0 Full Speed compatible

• Combined RS232/RS485.
   

Outputs

• 4 opto-isolated solid state relays rated at 50V, 300mA Configurable as setpoints, latching alarms or user outputs. Each with status LED.

• Adjustable Analog output (0 - 2.5V) with 16 bit resolution.
   

Inputs

• 4 opto-isolated inputs with 10-30 VDC range. Each with status LED

• Input #2 configurable as high speed counter

• Input #1 configurable as sample trigger (option)
   

Dimensions (mm)

• Standard OEM model 160 x 100mm (1/2 Eurocard)

• ABS cased (option) Standard OEM model 160 x 100mm (1/2 Eurocard)

• ABS cased (option)
   

Software included:

• LCIC-WIM Calibration Wizard software is included with each board

• Drivers and examples for programmers on how to communicate with the board

• PC application software for easy start-up for each one of our embedded applications

 

Our LCIC-WIM Monitoring package utility - A vital tool for analyzing dynamic load/force applications